Powder Heaters

Powder Heaters

Powder Heaters, also called as Powder Coating Ovens, are used to cure powder coating finishes, typically in a range between 180°C to 210°C . Powder coating is a method of applying both a decorative and, protective finish to a wide range of substrates in both industrial and consumer sectors.

Process

Essentially, powder coating is the process of applying dry paint to a metal object. The object needs to be cleaned of dirt and grease which can be done by sand blasting. The next step is to get the metal covered in an electronically charged liquid and powder mixture. This is done by either immersing the object into an electronically charged liquid or spraying it with this mixture in a powder coating booth.

Maintenance

The use of powder coating is on the increase with new areas of application being constantly explored. Powder that can be applied to MDF has even been developed! Once an object has been powder coated it’s easy to maintain a beautiful appearance. Minimal maintenance is needed and all you need to do is wash off any dirt build-up with soapy water, followed by a rinse with clean water. Every six months should do the trick. It is the salt and moisture in dirt that badly affects the powder coated surface, so if you live near the sea, you will need to wash the item more often.

When a Powder Heater or Powder Coating Oven is used correctly, the end result should not crack or chip. If the item isn’t damaged when installed, and is cleaned regularly, the surface should be just about permanent. You’ll have a stylish, attractive object that should last for a very long time.