Difference between revisions of "Collars"

Jump to navigation Jump to search
1,415 bytes added ,  22:22, 27 January 2013
no edit summary
 
Line 1: Line 1:
[[Category:Mechanical Components]]{{Knoppen}}
[[Category:Mechanical Components]]{{Knoppen}}
[[File:Collar.jpg|thumb|right|Collars]]
'''Collars''' are used as mechanical stops, locating components, and bearing faces. The simple design lends itself to easy installation.


Collars are used as mechanical stops, locating components, and bearing faces. The simple design lends itself to easy installation.
 
 
 
==Clamping style==
Clamp style collars are designed to solve the problems associated with the set screw collar and come in one- and two-piece designs. Instead of protruding into the shaft, the screws act to compress the collar and lock it into place. The ease of use is maintained with this design and there is no shaft damage. Since the screws compress the collar, a uniform distribution of force is imposed on the shaft, leading to a holding power that is nearly twice that of set screw collars.
 
Although clamp type collars work very well under relatively constant loads, shock loads can cause the collar to shift its position on the shaft. This is due to the very high forces that can be created by a relatively small mass during impact, compared to a statically or gradually applied load. As an option for applications with this type of loading, an undercut can be made on the shaft and a clamp collar can be used to create a positive stop that is more resistant to shock loads.
 
Perhaps the most innovative and useful of the collars is the two-piece clamping collar. Two-Piece Clamp Style shaft collars can be disassembled or installed in position without having to remove other components from the shaft. The two-piece design provides the most holding power of all shaft collars because more compressive forces are utilized to lock the collar onto the shaft.

Navigation menu