Filter Elements
Jump to navigation
Jump to search
Filter element is a device within a filter tank designed to entrap solids and conduct water to a manifold, collection header, pipe or similar conduit and return it to the pool, spa or hot tub. A filter element usually consists of a septum and septum support, or a cartridge.
Elements
Wire Mesh Element
- Corrosion protection due to stainless steel filter material and fin-plated or nickel-plated steel parts.
- Cleanable
- Filtrafion ratings: 25µm, 50µm, 74µm, 100µm, 149µrn, and 200µm nominal
Metal Fiber Element
- Safeguards high filtration efficiency even at extreme dynamic loads
- High contamination retention capacity due to deep filtering which results in a longer service life
- Low flow resistance
- Corrosion protection due to stainless steel filter material and fin-plated steel parts
- High differential pressure tolerance
- Economical due to cleanability
- High temperature range
Disposable Polyester Element
- Higher contamination retention capacity then cellulose due to deep filtration
- Low flow resistance
- Media supported on both sides with wire mesh
- Good fluid comparability due to media being free of bonding agent
- Filtration ratings: 10µm, and 20µm nominal
Mobilemicron Elements
- Extremely low UP across elements when utilized with high viscosity fluids or cold start conditions
- Melt blown fiberglass media construction
- Good dirt holding capacity
- Good beta stability
Video