Combined Heaters
A Combination heater is a compact and efficient unit that provides all the space heating (such as in-floor radiant heating, baseboard heating and fan assistance air handler heating), and all the domestic hot water a home needs while saving on operating and installation costs. Why install a boiler, a water heater, and a buffer tank, when you can install just one combination unit and save money, space and on installation.
Heating options
- Electric power. Ceramic heating element controlled by the operating thermostat and secured by the safety thermostat (thermal fuse).The thermal range is 5–74 °C. Connection voltage is 1-PE–N/AC 230 V/50 Hz. The IP 45 electric shielding enables mounting of heaters above baths.
- Heat exchanger. The heater may be connected to an external hot water source with the max. temperature of 110 °C and pressure of 1 MPa . Heater with the adequate output of the heat exchanger must be linked depending on the output of the source. The heat exchanger works in forced circulation mode and also in self-circulation system. The heating water regulation sensor may be inserted into the common receiver with electric installation sensors.
Most common use
- Preparation of hot utility water for premisses with hot water central heating using gas and solid fuels during a winter season.
- Electric heating off the heating period is enabled with the possibility to use the low tariff of electric supply (night tariff).
Common Types
Suspended or Vertical Combined Heater
Combined storage water heaters designed for suspension on the wall with volumes of 80–200 litres. The manufacturer throughout all the history of the heaters production keeps same pitch of the anchoring bolts in order to assure easy replacement of time-expired water heaters. It is also possible to buy the suspension for the pitch of the anchoring bolts reaching 350 mm.
Horizontal Combined Heater
The combined storage water heater with horizontal operating position designed for premisses with the lack of space with volumes between 125–200 litres. The water heater may be fixed on the wall using the supplied brackets or fitted in horizontal position on adequate construction. It is always necessary to count with the lack of space above and below the water heater for fitting of the supply pipeline.