Concrete Pulverizer Machines

Concrete Pulverizer Machines

Concrete Pulverizer Machines are designed for in recycling and broken off concrete use for reinforced concrete crushed, ceiling, support or similar materials remove, and at any place quiet, no vibration is necessary. Unit operates a cylinder rotate bearing, for possible torsion compensation, and reverse the built-in oil supplies through the piston rod hydraulic cylinder. The piston rod are protected from damage and broken arm and housing is wear-resisting, fine grain steel into. The rotation of the hydraulic these units driver can open for the 360 degrees, to fast, each work position movement allows. They can be used on the entire range of excavators, from 8 tons upwards, and its areas of application are numerous: demolition work, building work in general, upgrading of ex industrial and urban areas, treatment of material from excavation work, the earth moving sector and road work, quarries and mines, environmental clearance work and rock breaking applications.

Operation Principle

The lower jaw is V-shaped to resemble a scoop, thus making the scooping work easy. As the crushing tooth is arranged in the center of the upper jaw, the crushing force concentrates on the crushing tooth when splitting broken concrete masses, thus exerting great crushing force. Both upper and lower jaws can retain a longer service life, as carbide wear-resistant steel is employed in parts vulnerable to wear and tear

Features

• Special configuration teeth, and specific crushed horizontal and vertical direction. Because of his chin close, concrete cracking, bending are
• Teeth and jaw crusher unique design makes the can easily stripping the reinforced concrete and reinforced bundled into a compact "pad", easy to load and disposal.
• Easy to install: crusher is by bucket hydraulic cylinder connectionless or need to install the package.
• Equipped with high alloy steel, wear-resisting teeth, whether it be changing or, long-term trouble-free weld service life.
• A large pivot pin and bushing is a crusher design, from damage dipperstick needle speak component parts.
• Optional cutting blade cutting/size reinforced with. The BB also mill and loading a fight.