Filter Elements

Filter Elements

Filter Elements

Filter Elements

Filter element is a device within a filter tank designed to entrap solids and conduct water to a manifold, collection header, pipe or similar conduit and return it to the pool, spa or hot tub. A filter element usually consists of a septum and septum support, or a cartridge.

Elements

Wire Mesh Element

• Conrosion protection due to stainless steel filter material and fin-plated or nickel-plated steel parts.

• Cleanable

• Filtrafion ratings: 25µm, 50µm, 74µm, 100µm, 149µrn, and 200µm nominal

Metal Fiber Element

• Safeguards high filtration efficiency even at extreme dynamic loads

• High contamination retention capacity due to deep filtering which results in a longer service life

• Low flow resistance

• Corrosion protection due to stainless steel filter material and fin-plated steel parts

• High differential pressure tolerance

• Economical due to cleanability

• High temperature range

Disposable Polyester Element

• Higher contamination retention capacity then cellulose due to deep filtration

• Low flow resistance

• Media supported on both sides with wire mesh

• Good fluid comparability due to media being free of bonding agent

• Filtration ratings: 10µm, and 20µm nominal

Mobilemicron Elements

• Extremely low UP across elements when utilized with high viscosity fluids or cold start conditions

• Melt blown fiberglass media construction

• Good dirt holding capacity

• Good beta stability