Difference between revisions of "Dehumidificators"

From SolidsWiki
Jump to navigation Jump to search
Line 6: Line 6:
* -------------------------------------------------></noinclude>  
* -------------------------------------------------></noinclude>  


[[File:Turbo_Dryers.jpg|thumb|200px|right|Turbo Dryer]]
[[File:Dehumidificators.jpg|thumb|200px|right|Dehumidificators]]





Revision as of 05:17, 9 August 2012


Dehumidificators


DEHUMIDIFICATORS A dehumidificator usually has a removable plastic bucket for a reservoir; most buckets also have a place where you can hook up a hose so the collected water can drain straight into a floor drain or pump. This frees you from having to remember to dump out the water. But don't worry too much about the reservoir overflowing -- most dehumidificator also have an automatic shut-off. If you're using a dehumidificator in extremely moist conditions, however, or if you need to keep your dehumidificator on all the time, you should look into a unit with a built-in condensate pump, which regularly pumps water out of the unit's reservoir rather than simply relying on gravity to empty it as a hose does. Many dehumidificator also have a humidistat, which allows you to set your desired level of relative humidity. A humidistat has two parts: a sensing element and a relay amplifier. The sensing element includes two alternate metal conductors, and changes in relative humidity will cause electrical resistance between those conductors. The relay amplifier measures this resistance and sends a signal to turn the dehumidificator on or off. These basic components add up to a device that may make your home feel a whole lot better.