Difference between revisions of "Auger Screws"

From SolidsWiki
Jump to navigation Jump to search
m (Reverted edits by Lavetannpl (talk) to last revision by Admin)
Line 7: Line 7:
* Please start editing this page after the /noinclude  
* Please start editing this page after the /noinclude  
* -------------------------------------------------></noinclude>
* -------------------------------------------------></noinclude>
[[File:Auger_screws1.jpg|200px|thumb|right|Auger Screws]]
This page is still empty. If you know something about this product, please share your knowledge with others.
 
 
'''GranuleExtruder''' describes making an auger screw out of copper mains wires wound around a copper pipe.
 
When making of Auger screws we do face manyt difficulties, They are :
 
 
* Too much heat conducted up the screws
* The JB-Weld block was too small - the things attached to it got too hot,
* The worm drive was too slow.
 
Good bits were:
It worked! It was easy to make, and It used completely standard RepRap electronics and software.
The next one will:
Have a moulded JB-Weld screw, Have a better thermal barrier between the top of the barrel and the rest of the machine, and Lose the worm drive - direct would be better and simpler.
 
'''Augers and feed screws'''
 
Jerpbak Bayless on a regular basis manufactures from a solid bar, augers and  feed screws up to 5000 pounds. We regularly utilize various tool and alloy  steels. Sizes range from less than 1.0" up to 10.0" diameter and up to 225" in  length.
 
 
After the parts are rough machined, we optionally employ our  hardface welding machinery to equip components with hardface welded flights.  And, with our sophisticated grinding and polishing techniques, each auger and  feed screw is polished up to an 8 RMS surface finish.  Finally, through thorough  inspection of all part features, we are able to ensure that our products meet  the highest customer expectations. Providing a five week lead time for these  one-off, small volume production of augers and feed screws, we are able to  employ many of our advanced manufacturing and inspection services to  successfully produce a series of products that happily meet all client  requirements.
 
Feed Screws and mixing Screws are screws or augers placed in bins, silos, extruders, hoppers, or molding machine to provide uniform flow. As the screw turns, process material is mixed and conveyed.
 
 
_____________________________________________________________________________________________________________________________________________
 
<youtube>dzcN9Ne-XIQ</youtube>

Revision as of 19:32, 7 August 2012


This page is still empty. If you know something about this product, please share your knowledge with others.

Retrieved from "https://www.solidswiki.com/index.php?title=Auger_Screws&oldid=9662"