Difference between revisions of "Vertical Ribbon Blenders"

From SolidsWiki
Jump to navigation Jump to search
Line 11: Line 11:
[[Image: Vertical-ribbon-mixer.jpg |thumb|200px|This is a conical, vertical ribbon blender especially designed for handling free flowing and cohesive powders.]]
[[Image: Vertical-ribbon-mixer.jpg |thumb|200px|This is a conical, vertical ribbon blender especially designed for handling free flowing and cohesive powders.]]


'''Vertical Ribbon Mixers''' Consist of a tank with its contents recirculated through an upright auger. Actual agitation occurs only in auger which occupies less than one-tenth of the space in a typical 1-ton upright. Can not effectively handle liquid molasses or roughage. Operational efficiency also suffers due to the excessive amount of time required for mixing and unloading when compared with a horizontal mixer. Furthermore, thorough clean out is not achieved.
'''Vertical Ribbon Mixers''' (a type of [[Ribbon Mixers | Ribbon mixer]]Consist of a tank with its contents recirculated through an upright auger. Actual agitation occurs only in auger which occupies less than one-tenth of the space in a typical 1-ton upright. Can not effectively handle liquid molasses or roughage. Operational efficiency also suffers due to the excessive amount of time required for mixing and unloading when compared with a horizontal mixer. Furthermore, thorough clean out is not achieved.
 
 
 
==Working Principle==
 
First step is charging of mixer from the top, manually or vide pneumatic or mechanical conveying. After the mixer is charged the mixing process starts.                                                 
The mixing is carried by means of 3 distinct intermixing actions:
 
*The screw agitator, turning on its axis, produces a lifting action as it spirals the materials in an upward flow.
*At the same time, orbiting the tank, the screw removes material away from the wall and deflects it into the centre of the tank.
*Material lifted by the screw gravitates downward, thoroughly intermixing with material being spiraled upwards.
                 
The typical speed of the central screw is 70 to 80 Rpm. The Tip speed can fluctuate from 1 to 3 m/s. The result is most intimate intermingling of all ingredients. The mixing time is depending on product characteristics, mixing accuracy and batch size

Revision as of 08:08, 13 February 2012

HOSOKAWA MICRON


This is a conical, vertical ribbon blender especially designed for handling free flowing and cohesive powders.

Vertical Ribbon Mixers (a type of Ribbon mixerConsist of a tank with its contents recirculated through an upright auger. Actual agitation occurs only in auger which occupies less than one-tenth of the space in a typical 1-ton upright. Can not effectively handle liquid molasses or roughage. Operational efficiency also suffers due to the excessive amount of time required for mixing and unloading when compared with a horizontal mixer. Furthermore, thorough clean out is not achieved.

Retrieved from "https://www.solidswiki.com/index.php?title=Vertical_Ribbon_Blenders&oldid=5919"