Difference between revisions of "Conveyor Chains"
m |
|||
| Line 7: | Line 7: | ||
* Please start editing this page after the /noinclude | * Please start editing this page after the /noinclude | ||
* -------------------------------------------------></noinclude> | * -------------------------------------------------></noinclude> | ||
[[File:Conveyor-Chain1.jpg|thumb|right|Conveyor Chains]] | |||
[[File:Conveyor Chain.jpg|thumb|right|Conveyor Chains]] | |||
'''Conveyor Chains''' consists of a series of journal bearings held in precise relationship to each other by constraining link plates.Each bearing consists of a bearing pin and bush on which the chain roller revolves. The bearing pin and bush are case-hardened to allow articulation under high pressures, and to contend with the load carrying pressure and gearing action imparted via the chain rollers.There is, for each strength of conveyor chain, a range of pitches; the minimum pitch being governed by the need for adequate wheel tooth strength; the maximum pitch being normally dictated by plate and general chain rigidity. When required, the normal maximum pitch can be exceeded by the use of strengthening bushes between the link plates, and suitable gaps to clear the bushes must be provided in the wheel teeth. | |||
==Uses== | |||
* Mining | |||
* Food processing | |||
* Sewage treatment | |||
* Timber harvesting | |||
* Agriculture | |||
* Textile machinery | |||
* Car plants | |||
* Cement works | |||
* Material handling | |||
Latest revision as of 11:32, 22 August 2012
Conveyor Chains consists of a series of journal bearings held in precise relationship to each other by constraining link plates.Each bearing consists of a bearing pin and bush on which the chain roller revolves. The bearing pin and bush are case-hardened to allow articulation under high pressures, and to contend with the load carrying pressure and gearing action imparted via the chain rollers.There is, for each strength of conveyor chain, a range of pitches; the minimum pitch being governed by the need for adequate wheel tooth strength; the maximum pitch being normally dictated by plate and general chain rigidity. When required, the normal maximum pitch can be exceeded by the use of strengthening bushes between the link plates, and suitable gaps to clear the bushes must be provided in the wheel teeth.
Uses
- Mining
- Food processing
- Sewage treatment
- Timber harvesting
- Agriculture
- Textile machinery
- Car plants
- Cement works
- Material handling