Difference between revisions of "Spray Dryers"
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
* Please start editing this page after the /noinclude | * Please start editing this page after the /noinclude | ||
* -------------------------------------------------></noinclude> | * -------------------------------------------------></noinclude> | ||
[[File: | [[File:Spray_Dryers.jpg|200px|thumb|right|Spray Dryers]] | ||
The '''Spray Dryers''' offer an effective and efficient method of removal of surface or on bound moisture from a feed product. Spray dryers are | The '''Spray Dryers''' offer an effective and efficient method of removal of surface or on bound moisture from a feed product. Spray dryers are pneumatic dryers having very low residence time within the equipment, thus flashing off the moisture from the feed. They are used for efficient drying of moist powders. Slurry, filter cakes, granules, etc. They operate on varying throughput rates from few hundred kilograms per hour to hundreds of tons per hour. Low temperature dehumidified air could be used for heat sensitive products to hot gases with temperature up to 500 - 600 deg. C. for temperature resistant products. spray drying equipment comprises of the feeding section normally a screw feeder, rotary valve, vibratory feeder, etc. Which feeds the wet product in a controlled fashion into the throat of the flash drier, where it is mixed with hot air produced by a hot air generator or heat exchanger | ||
Latest revision as of 05:11, 30 July 2012
The Spray Dryers offer an effective and efficient method of removal of surface or on bound moisture from a feed product. Spray dryers are pneumatic dryers having very low residence time within the equipment, thus flashing off the moisture from the feed. They are used for efficient drying of moist powders. Slurry, filter cakes, granules, etc. They operate on varying throughput rates from few hundred kilograms per hour to hundreds of tons per hour. Low temperature dehumidified air could be used for heat sensitive products to hot gases with temperature up to 500 - 600 deg. C. for temperature resistant products. spray drying equipment comprises of the feeding section normally a screw feeder, rotary valve, vibratory feeder, etc. Which feeds the wet product in a controlled fashion into the throat of the flash drier, where it is mixed with hot air produced by a hot air generator or heat exchanger