Difference between revisions of "Louvre Valves"
(Created page with "Category:Valves{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can improve the content. * Improper u...") |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
[[Category:Valves]]{{Knoppen}} | [[Category:Valves]]{{Knoppen}} | ||
[[File:Louvre Valves.jpg|thumb|right|Louvre Valves]] | |||
'''Louvre Valves''' are suitable for gases at low or high temperatures, and applicable in cogeneration plants, waste heat recovery systems, inlet air for burners and industrial ventilation systems.Rectangular or square section flanged louvre valves to intercept or regulate airflow, fumes or gas at high temperatures. | |||
==Common Design== | |||
Louvre Valves square shaped and fits vertically or horizontally into flue gas ducts. It consists of three to eight louvres which can be set to any position between 0° and 90° and which open alternately clockwise and anticlockwise. A remote indicator is mounted on the outside of the frame to show the position of each individual louvre. Operation is effected via a geared motor and a set of levers. The opening, resetting, and closing of Gas Control Valves and Dampers may be effected by remote control, or automatically by means of the electric motors. In each case a signal is automatically transmitted to a central control panel showing the gate position. Valves are constructed from steel spinnings protected by a polyester powder gloss white finish. Flanges are fitted with sealing gaskets and all units are supplied as standard with plated steel mounting subframes. | |||
==Video== | |||
<youtube>nK4RgGNmkik</youtube> | |||
Latest revision as of 19:07, 29 April 2013
Louvre Valves are suitable for gases at low or high temperatures, and applicable in cogeneration plants, waste heat recovery systems, inlet air for burners and industrial ventilation systems.Rectangular or square section flanged louvre valves to intercept or regulate airflow, fumes or gas at high temperatures.
Common Design
Louvre Valves square shaped and fits vertically or horizontally into flue gas ducts. It consists of three to eight louvres which can be set to any position between 0° and 90° and which open alternately clockwise and anticlockwise. A remote indicator is mounted on the outside of the frame to show the position of each individual louvre. Operation is effected via a geared motor and a set of levers. The opening, resetting, and closing of Gas Control Valves and Dampers may be effected by remote control, or automatically by means of the electric motors. In each case a signal is automatically transmitted to a central control panel showing the gate position. Valves are constructed from steel spinnings protected by a polyester powder gloss white finish. Flanges are fitted with sealing gaskets and all units are supplied as standard with plated steel mounting subframes.
Video