Difference between revisions of "Clamshell Gates"

From SolidsWiki
Jump to navigation Jump to search
(Created page with "Category:Valves{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can improve the content. * Improper u...")
 
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
[[Category:Valves]]{{Knoppen}}
[[Category:Valves]]{{Knoppen}}
<noinclude><!------------------------------------------------
[[File:Clamshell gate.jpg|thumb|right|Clamshell Gates]]
* READ THIS FIRST
'''Clamshell Gates''' are typically used for cutting off material flow when loading hopper, bins and other containers and are suited for the unrestricted bulk discharge of bulk materials out of silos and bunkers. In an open position the clams are situated outside the area of material flow thus improving the life cycle of the clamshell due to reduced wear.
* Only edit this page if you can improve the content.
 
* Improper use of this page will lead to permanent banning.
The clamshell gate is designed so that most material tends not to push the gates open under normal operating conditions resulting in a fail safe gate should air pressure be lost to the pneumatic cylinder. Cylinder mounted limit switches can be fitted as optional extras.
* Please do not edit the sponsored link on the top right corner.
Valve options include stainless steel construction and fitting of gear covers, linear electric actuators and mechanical limit switches.
* Please start editing this page after the /noinclude
* -------------------------------------------------></noinclude>
This page is still empty. If you know something about this product, please share your knowledge with others.

Latest revision as of 07:20, 11 January 2013

Clamshell Gates

Clamshell Gates are typically used for cutting off material flow when loading hopper, bins and other containers and are suited for the unrestricted bulk discharge of bulk materials out of silos and bunkers. In an open position the clams are situated outside the area of material flow thus improving the life cycle of the clamshell due to reduced wear.

The clamshell gate is designed so that most material tends not to push the gates open under normal operating conditions resulting in a fail safe gate should air pressure be lost to the pneumatic cylinder. Cylinder mounted limit switches can be fitted as optional extras. Valve options include stainless steel construction and fitting of gear covers, linear electric actuators and mechanical limit switches.