Twin Screw Feeders

twin-screw feeder

The twin-screw feeder feeds powdered products to bagging scales. Exact weights to precise dosing and consistent product feeding. The mode of feed of the twin-screw feeder is divided into fast and dribble flow, which allows an accurate achievement of desired weights. Horizontal louvers incorporated in the outlet and a quick-action three-phase brake for controlling the dribble flow enable neat cut-off of the product flow. The optimal inlet geometry ensures uniform product feed. Wide throughput range for high product throughput, the division of the feeding mode into fast and dribble flow enables a high product throughput. It has high sanitation, the twin-screw feeder is also available in a stainless steel version with cleaned bearings.

The twin screw side feeder includes side feeder for feeding various elements with force from side to main line. This twin screw side feeder is controlled through AC inverter. It was designed twin screw side feeder in a way to feed handle at higher rates and to achieve the required objective of extrusion. Also its salient features such as robust construction, reliable performance, highly efficient and long working ability. Moreover, it is ideal for feeding like glass, calcium, and other minerals.

Their primary function is to feed non-flowing material into the pump to ensure high pump efficiencies are achieved. The opening length of the screw feeders come in many sizes to accommodate even the most unique user needs.

Each screw is supported at the drive end by oil lubricated bearing installed in the screw feeder gear box and at the tail end by outboard grease lubricated bearings. The gear box is sized in accordance with the material to be pumped and the pressure required in the suction housing to ensure good filling efficiency. The entire rotating assembly is designed to provide continuous duty under all anticipated load conditions.