Difference between revisions of "Discharge Cones"
Jump to navigation
Jump to search
(Created page with "Category: Loading and Unloading Equipment{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can imp...") |
PurplePen19 (talk | contribs) |
||
| Line 7: | Line 7: | ||
* Please start editing this page after the /noinclude | * Please start editing this page after the /noinclude | ||
* -------------------------------------------------></noinclude> | * -------------------------------------------------></noinclude> | ||
[[File:Discharge Cones_1.jpg|thumb|200px|right|Discharge Cones]] | |||
'''Discharge Cones''' makes it easy to get your product out of your drum. Simply invert the drum and the product flows out in a controlled manner. See our range of drum hoists and drum tippers. | |||
Discharge cones are also used for large Semi Autogenous Grinding (SAG) and Autogenous Grinding (AG) mills are subjected to high wear as significant volumes of ground ore and slurry exit the mill. With the larger diameter mills of 32ft to 40ft in size becoming the norm, very high, concentrated wear is highlighting the limitations of conventional discharge cones and frequent changes are subsequently required. | |||
==Common Sizes of the Cones== | |||
Cones are available to fit with the standard drum sizes. | |||
*315mm | |||
*400mm | |||
*457mm | |||
*560mm | |||
*647mm | |||
*750mm | |||
==Design Features== | |||
*Safe handling | |||
*Extended wear life | |||
*Superior wear material | |||
*Full cast nose cone | |||
*Cast installation lugs | |||
*Cast centre clamping ring | |||
*"Key" design for installation | |||
*Weight reduction | |||
*Improved Liner performance | |||
Latest revision as of 04:50, 8 September 2013
Discharge Cones makes it easy to get your product out of your drum. Simply invert the drum and the product flows out in a controlled manner. See our range of drum hoists and drum tippers.
Discharge cones are also used for large Semi Autogenous Grinding (SAG) and Autogenous Grinding (AG) mills are subjected to high wear as significant volumes of ground ore and slurry exit the mill. With the larger diameter mills of 32ft to 40ft in size becoming the norm, very high, concentrated wear is highlighting the limitations of conventional discharge cones and frequent changes are subsequently required.
Common Sizes of the Cones
Cones are available to fit with the standard drum sizes.
- 315mm
- 400mm
- 457mm
- 560mm
- 647mm
- 750mm
Design Features
- Safe handling
- Extended wear life
- Superior wear material
- Full cast nose cone
- Cast installation lugs
- Cast centre clamping ring
- "Key" design for installation
- Weight reduction
- Improved Liner performance