Difference between revisions of "Metalworking"

Jump to navigation Jump to search
81 bytes added ,  05:54, 11 December 2012
no edit summary
Line 19: Line 19:
Marking out is the process of transferring a design or pattern to a workpiece and is the first step in the handcraft of metalworking. It is performed in many industries or hobbies, although in the repetition industries the need to mark out every individual piece is eliminated. In the metal trades area, marking out consists of transferring the engineer's plan to the workpiece in preparation for the next step, machining or manufacture.
Marking out is the process of transferring a design or pattern to a workpiece and is the first step in the handcraft of metalworking. It is performed in many industries or hobbies, although in the repetition industries the need to mark out every individual piece is eliminated. In the metal trades area, marking out consists of transferring the engineer's plan to the workpiece in preparation for the next step, machining or manufacture.
Calipers are hand tools designed to precisely measure the distance between two points. Most calipers have two sets of flat, perpendicular edges used for inner or outer diameter. These calipers can be accurate to within one-thousandth of an inch (25.4μm). Different types of calipers have different mechanisms for displaying the distance measured. Where larger objects need to be measured with less precision, a tape measure is often used.
Calipers are hand tools designed to precisely measure the distance between two points. Most calipers have two sets of flat, perpendicular edges used for inner or outer diameter. These calipers can be accurate to within one-thousandth of an inch (25.4μm). Different types of calipers have different mechanisms for displaying the distance measured. Where larger objects need to be measured with less precision, a tape measure is often used.
==Sources==
[http://en.wikipedia.org/wiki/Metalworking Wikipedia Metalworking]

Navigation menu