3,218
edits
Difference between revisions of "Distributed Control Systems DCS"
Jump to navigation
Jump to search
Distributed Control Systems DCS (view source)
Revision as of 06:00, 8 December 2012
, 06:00, 8 December 2012no edit summary
| Line 23: | Line 23: | ||
* Sensor networks | * Sensor networks | ||
* Dry cargo and bulk oil carrier ships | * Dry cargo and bulk oil carrier ships | ||
==Elements== | |||
Distributed control systems typically uses custom designed processors as [[Controllers]] and uses both proprietary interconnections and communications protocol for communication. Input and output modules form component parts of the DCS. The processor receives information from input modules and sends information to output modules. The input modules receive information from input instruments in the process and transmit instructions to the output instruments in the field. Computer buses or electrical buses connect the processor and modules through multiplexer or demultiplexers. Buses also connect the distributed controllers with the central controller and finally to the human–machine interface (HMI) or control consoles. The elements of a DCS may connect directly to physical equipment such as switches, pumps and valves or they may work through an intermediate system such as a SCADA system. | |||
==Applications== | |||
Distributed control systems (DCSs) are dedicated systems used to control manufacturing processes that are continuous or batch-oriented, such as oil refining, petrochemicals, central station power generation, fertilizers, pharmaceuticals, food and beverage manufacturing, cement production, steelmaking, and papermaking. DCSs are connected to sensors and actuators and use setpoint control to control the flow of material through the plant. The most common example is a setpoint control loop consisting of a pressure sensor, controller, and control valve. Pressure or flow measurements are transmitted to the controller, usually through the aid of a signal conditioning input/output device. When the measured variable reaches a certain point, the controller instructs a valve or actuation device to open or close until the fluidic flow process reaches the desired setpoint. Large oil refineries have many thousands of input/output points and employ very large DCSs. Processes are not limited to fluidic flow through pipes, however, and can also include things like paper machines and their associated quality controls, variable speed drives and motor control centers, cement kilns, mining operations, ore processing facilities, and many others. | |||
A typical DCS consists of functionally and/or geographically distributed digital controllers capable of executing from 1 to 256 or more regulatory control loops in one control box. The input/output devices can be integral with the controller or located remotely via a field network. Today’s controllers have extensive computational capabilities and, in addition to proportional, integral, and derivative (PID) control, can generally perform logic and sequential control. Modern DCSs also support neural networks and fuzzy application. | |||
DCS systems are usually designed with redundant processors to enhance the reliability of the [[Control Systems]]. Most systems come with canned displays and configuration software which enables the end user to set up the control system without a lot of low level programming. This allows the user to better focus on the application rather than the equipment, although a lot of system knowledge and skill is still required to support the hardware and software as well as the applications. Many plants have dedicated groups that focus on this task. These groups are in many cases augumented by vendor support personnel and/or maintenance support contracts. | |||
DCSs may employ one or more workstations and can be configured at the workstation or by an off-line personal computer. Local communication is handled by a control network with transmission over twisted pair, coaxial, or fiber optic cable. A server and/or applications processor may be included in the system for extra computational, data collection, and reporting capability. | |||
==Sources== | |||
[http://en.wikipedia.org/wiki/Distributed_control_system Wikipedia Distributed Control System] | |||