Difference between revisions of "V-Cone Dryers"

V-Cone Dryers (view source)

6 bytes added , 17:59, 24 July 2012

697

edits

@@ Line 4: / Line 4: @@
 ===Introduction===
 '''
-  : 1 Cubic Foot Twin Shell Dry Blender, 304 Stainless Steel. (2) 11"  Diameter top charge ports with quick release covers, approximately  16-1/2" deep. Carbon steel jacket rated 30 PSI @ 250 Degrees F. Maximum  material density 300 LBS/CuFt. Shell driven by a 3/4 HP, 3/60/230/460  Volt, 1725 RPM XP gear motor. 6" center bottom outlet with a manually  operated butterfly valve. Unit mounted on a stand with 14" high legs,  approximate 38" discharge height.
+  :
+=====1 Cubic Foot Twin Shell Dry Blender, 304 Stainless Steel. (2) 11" Diameter top charge ports with quick release covers, approximately 16-1/2" deep. Carbon steel jacket rated 30 PSI @ 250 Degrees F. Maximum material density 300 LBS/CuFt. Shell driven by a 3/4 HP, 3/60/230/460 Volt, 1725 RPM XP gear motor. 6" center bottom outlet with a manually operated butterfly valve. Unit mounted on a stand with 14" high legs, approximate 38" discharge height=====
+.
 ====Condition====:USED