Auger Screws

From SolidsWiki
Revision as of 09:43, 2 August 2012 by Lavetannpl (talk | contribs)
Jump to navigation Jump to search


Auger Screws1


GranuleExtruder describes making an auger screw out of copper mains wires wound around a copper pipe.

When making of Auger screws we do face manyt difficulties, They are :


  • Too much heat conducted up the screws
  • The JB-Weld block was too small - the things attached to it got too hot,
  • The worm drive was too slow.

Good bits were: It worked! It was easy to make, and It used completely standard RepRap electronics and software. The next one will: Have a moulded JB-Weld screw, Have a better thermal barrier between the top of the barrel and the rest of the machine, and Lose the worm drive - direct would be better and simpler.

Augers and feed screws

Jerpbak Bayless on a regular basis manufactures from a solid bar, augers and feed screws up to 5000 pounds. We regularly utilize various tool and alloy steels. Sizes range from less than 1.0" up to 10.0" diameter and up to 225" in length.


After the parts are rough machined, we optionally employ our hardface welding machinery to equip components with hardface welded flights. And, with our sophisticated grinding and polishing techniques, each auger and feed screw is polished up to an 8 RMS surface finish. Finally, through thorough inspection of all part features, we are able to ensure that our products meet the highest customer expectations. Providing a five week lead time for these one-off, small volume production of augers and feed screws, we are able to employ many of our advanced manufacturing and inspection services to successfully produce a series of products that happily meet all client requirements.

Feed Screws and mixing Screws are screws or augers placed in bins, silos, extruders, hoppers, or molding machine to provide uniform flow. As the screw turns, process material is mixed and conveyed.


_____________________________________________________________________________________________________________________________________________