Electro-Pneumatic Hammers Blasts

Electro-Pneumatic Hammer Blast

The Electro-Pneumatic Hammer Blast adds to the mechanical action of the PS-type Hammer a compressed air jet expanding across the surrounding wall surface. It also adds more extended impact vibration. The Hammer Blast is most suitable for materials with a tendency to bridge and/or hygroscopic properties.

The Electro-Pneumatic hammer blast is electropneumatically actuated, and it develops three simultaneous actions:

• instantaneous hammering
• extended vibration
• extended and intermittent airshot along the silo wall.

The combined effect of these three actions resolves globally and radically all mass flow problems. Guaranteed life at maximum pressure: 150.000 blows. Working temperature: -20°C to + 80°C.