Difference between revisions of "Ultraviolet Analyzers"

From SolidsWiki
Jump to navigation Jump to search
(Created page with "Category:Analyzing{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can improve the content. * Imprope...")
 
 
Line 1: Line 1:
[[Category:Analyzing]]{{Knoppen}}
[[Category:Analyzing]]{{Knoppen}}
<noinclude><!------------------------------------------------
[[File:Ultraviolet Analyzers.jpg|thumb|right|Ultraviolet Analyzers]]
* READ THIS FIRST
'''Ultraviolet Analyzer''' is a radiant energy analyzer that uses ultraviolet region of the electromagnetic radiation spectrum. This region consists of wavelengths from 100 to 400 microns. Chemical analysis is frequently achieved by absoption spectrophotometry in which radiation of different wavelengths is passed through a material, and the radiation transmitted, absobed, is measured to determine material identity and concentration. This technique is used in the ultraviolet, infrared, X-ray and similar regions, it usually surveys all the wavelengths in the UV or IR region, or at least in the region of interest, and plots the absorption vs wavelength.
* Only edit this page if you can improve the content.
 
* Improper use of this page will lead to permanent banning.
An UV analyzer can be expected to be less specific than an IR analyzer. And, UV analyzers are generally capable of more sensitivity than their IR counterparts - trace analyses are common for UV.
* Please do not edit the sponsored link on the top right corner.
Samples may be gas or liquid, but the sample must be relatively free of dirt and must be in a single phase. Trace measurements are possible. As for liquid samples, vapor bubbles cannot be tolerated because they generate noise in the optical reading. If a pressurized cell is used on a gas sample, the cell pressure must be maintained constant.
* Please start editing this page after the /noinclude
* -------------------------------------------------></noinclude>
This page is still empty. If you know something about this product, please share your knowledge with others.

Latest revision as of 08:56, 29 January 2013

Ultraviolet Analyzers

Ultraviolet Analyzer is a radiant energy analyzer that uses ultraviolet region of the electromagnetic radiation spectrum. This region consists of wavelengths from 100 to 400 microns. Chemical analysis is frequently achieved by absoption spectrophotometry in which radiation of different wavelengths is passed through a material, and the radiation transmitted, absobed, is measured to determine material identity and concentration. This technique is used in the ultraviolet, infrared, X-ray and similar regions, it usually surveys all the wavelengths in the UV or IR region, or at least in the region of interest, and plots the absorption vs wavelength.

An UV analyzer can be expected to be less specific than an IR analyzer. And, UV analyzers are generally capable of more sensitivity than their IR counterparts - trace analyses are common for UV. Samples may be gas or liquid, but the sample must be relatively free of dirt and must be in a single phase. Trace measurements are possible. As for liquid samples, vapor bubbles cannot be tolerated because they generate noise in the optical reading. If a pressurized cell is used on a gas sample, the cell pressure must be maintained constant.