Difference between revisions of "V-Rings"

From SolidsWiki
Jump to navigation Jump to search
(Created page with "Category:Mechanical Components{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can improve the conten...")
 
Line 1: Line 1:
[[Category:Mechanical Components]]{{Knoppen}}
[[Category:Mechanical Components]]{{Knoppen}}
<noinclude><!------------------------------------------------  
 
* READ THIS FIRST
'''V-Ring''' is a one-piece seal which is mounted on a shaft and seals axially against a counter face and normally rotates with the shaft.
* Only edit this page if you can improve the content.
 
* Improper use of this page will lead to permanent banning.
Rubber ring for shafts requiring a dynamic seal (primary or back-up) in the axial direction. The body of V seals rotate with the shaft and holds itself in position by its elastic fit on the shaft. Sealing is produced by the contact between the lip and the counterface.
* Please do not edit the sponsored link on the top right corner.
 
* Please start editing this page after the /noinclude
Additionally, the V Series seal has good sealing action when the shaft is eccentric and/or there is some misalignment. Combined with radial shaft seals, these axial face seal designs provide excellent excluding characteristics against all types of liquids, greases, oils, dirt, snad and other foreign materials.
* -------------------------------------------------></noinclude>
 
This page is still empty. If you know something about this product, please share your knowledge with others.
V-rings are flexible rubber seals that stretch-fit onto the shaft and rotate with the shaft against a counter face.  They are specifically designed to protect the primary seal from contaminants. These seals are... More Info
not designed to seal pressure differentials or to seal against fluid levels; they are primarily for contaminants exclusion. The seal design utilizes centrifugal force to prevent intrusion of contaminants into the bearing chamber.

Revision as of 00:42, 28 January 2013


V-Ring is a one-piece seal which is mounted on a shaft and seals axially against a counter face and normally rotates with the shaft.

Rubber ring for shafts requiring a dynamic seal (primary or back-up) in the axial direction. The body of V seals rotate with the shaft and holds itself in position by its elastic fit on the shaft. Sealing is produced by the contact between the lip and the counterface.

Additionally, the V Series seal has good sealing action when the shaft is eccentric and/or there is some misalignment. Combined with radial shaft seals, these axial face seal designs provide excellent excluding characteristics against all types of liquids, greases, oils, dirt, snad and other foreign materials.

V-rings are flexible rubber seals that stretch-fit onto the shaft and rotate with the shaft against a counter face. They are specifically designed to protect the primary seal from contaminants. These seals are... More Info not designed to seal pressure differentials or to seal against fluid levels; they are primarily for contaminants exclusion. The seal design utilizes centrifugal force to prevent intrusion of contaminants into the bearing chamber.