Gravity Diverter Valves - Revision history

Kodiyath at 15:48, 22 January 2013

2013-01-22T15:48:43Z

← Older revision		Revision as of 09:48, 22 January 2013
Line 1:		Line 1:
	[[Category:Valves]]{{Knoppen}}		[[Category:Valves]]{{Knoppen}}
			[[File:Gravity diverter valve.jpg\|thumb\|right\|Gravity Diverter Valves]]
			[[File:Gravity Diverter Valves1.jpg\|thumb\|right\|Gravity Diverter Valves]]
			'''Gravity Diverter Valves''' are used to redirect material flow in a gravity stream where there is no pressure differential between the inlet or the discharge leg(s) of the valve.It is designed to divert material to one of two destinations while in a gravity fall.
			These are designed to handle the gravity feed of dry powders, pellets, granules, or any other free flowing product. Valve is dust tight inside to outside. Flap-gate minimizes leakage between system legs. Contact factory representative for pressure and temperature limitations.

	Gravity diverter valves are used ~~to redirect material flow in a~~ gravity ~~stream~~ where ~~there is~~ no pressure ~~differential between~~ the ~~inlet or the discharge leg(s) of the valve~~.		Gravity diverter valves are a fabricated design used on gravity applications where little or no pressure is involved. These units are generally fabricated from 1/8" plate and include an internal flap that is manufactured with two plates sandwiching a polyurethane wiper seal. The whole assembly is mounted on the main spindle, which is supported externally by two sealed-for-life, 2-bolt flanged ball bearings.

	~~The Gravity Diverter Valve is designed to divert material to one~~ of ~~two destinations while in a~~ gravity ~~fall. The~~ valve ~~has a rectangular fabricated design~~		One special feature of gravity diverter valve is an interior with smooth surfaces for an optimum unobstructed flow of material. Also, the unique design provides a tight seal between the diverter flop gate and the sidewalls to prevent possible leaks when discharging material. Another special feature is the use of a high life cycle pneumatic rotary actuator to rotate the flop gate into position, eliminating all external moving parts. A visual indicator and position switches can be installed for visual and electrical verification of the valve position. A large inspection hatch enables easy access for inspection or maintenance of the internal components.
	~~The Meyer Diverter Valve offers~~ an ~~effective method~~ for ~~directing product~~ flow ~~from a single source to multiple destinations~~. ~~Ideal for batch systems. Can also be used as~~ a ~~two in~~ to ~~one gathering hopper~~.~~Designed to handle~~ the ~~gravity feed~~ of ~~dry powders, pellets, granules, or any other free flowing product. Valve is dust tight inside~~ to ~~outside. Flap-~~gate ~~minimizes leakage between system legs~~. ~~Contact factory representative~~ for ~~pressure~~ and ~~temperature limitations~~.

	~~Gravity diverter valves (click here for more information on fabricated diverter valves)~~
	are a fabricated design used on gravity applications where little or no pressure is involved. These units are generally fabricated from 1/8" plate and include an internal flap that is manufactured with two plates sandwiching a polyurethane wiper seal. The whole assembly is mounted on the main spindle, which is supported externally by two sealed-for-life, 2-bolt flanged ball bearings.

	gravity diverter valve is designed to divert a gravity flow of dry bulk solids into two or three different directions, depending on model chosen. The 307 series gravity diverter valve is designed with numerous special features which allow it to handle difficult materials which may be cohesive, dusty and/or abrasive. One special feature is an interior with smooth surfaces for an optimum unobstructed flow of material. Also, the unique design provides a tight seal between the diverter flop
	gate and the sidewalls to prevent possible leaks when discharging material. Another special feature is the use of a high life cycle pneumatic rotary actuator to rotate the flop gate into position, eliminating all external moving parts. A visual indicator and position switches can be installed for visual and electrical verification of the valve position. A large inspection hatch enables easy access for inspection or maintenance of the internal components.


	Features:		==Features==
	Compact, rugged ~~designSmall~~ divert angles ensure good flow ~~conditionsSmooth~~ internals with negligible lodgment ~~areasAvailable~~ with spigotted or flanged ~~endsPneumatics~~ and switches housed in ~~guardsEasy~~ access and ~~maintenanceMany~~ orientations and designs available		* Compact, rugged design
			* Small divert angles ensure good flow conditions
			* Smooth internals with negligible lodgment areas
			* Available with spigotted or flanged ends
			* Pneumatics and switches housed in guards
			* Easy access and maintenance
			* Many orientations and designs available

Kodiyath at 14:29, 22 January 2013

2013-01-22T14:29:49Z

← Older revision		Revision as of 08:29, 22 January 2013
Line 2:		Line 2:

	Gravity diverter valves are used to redirect material flow in a gravity stream where there is no pressure differential between the inlet or the discharge leg(s) of the valve.		Gravity diverter valves are used to redirect material flow in a gravity stream where there is no pressure differential between the inlet or the discharge leg(s) of the valve.

			The Gravity Diverter Valve is designed to divert material to one of two destinations while in a gravity fall. The valve has a rectangular fabricated design
			The Meyer Diverter Valve offers an effective method for directing product flow from a single source to multiple destinations. Ideal for batch systems. Can also be used as a two in to one gathering hopper.Designed to handle the gravity feed of dry powders, pellets, granules, or any other free flowing product. Valve is dust tight inside to outside. Flap-gate minimizes leakage between system legs. Contact factory representative for pressure and temperature limitations.

			Gravity diverter valves (click here for more information on fabricated diverter valves)
			are a fabricated design used on gravity applications where little or no pressure is involved. These units are generally fabricated from 1/8" plate and include an internal flap that is manufactured with two plates sandwiching a polyurethane wiper seal. The whole assembly is mounted on the main spindle, which is supported externally by two sealed-for-life, 2-bolt flanged ball bearings.

			gravity diverter valve is designed to divert a gravity flow of dry bulk solids into two or three different directions, depending on model chosen. The 307 series gravity diverter valve is designed with numerous special features which allow it to handle difficult materials which may be cohesive, dusty and/or abrasive. One special feature is an interior with smooth surfaces for an optimum unobstructed flow of material. Also, the unique design provides a tight seal between the diverter flop
			gate and the sidewalls to prevent possible leaks when discharging material. Another special feature is the use of a high life cycle pneumatic rotary actuator to rotate the flop gate into position, eliminating all external moving parts. A visual indicator and position switches can be installed for visual and electrical verification of the valve position. A large inspection hatch enables easy access for inspection or maintenance of the internal components.


			Features:
			Compact, rugged designSmall divert angles ensure good flow conditionsSmooth internals with negligible lodgment areasAvailable with spigotted or flanged endsPneumatics and switches housed in guardsEasy access and maintenanceMany orientations and designs available

Kodiyath at 04:58, 21 January 2013

2013-01-21T04:58:36Z

← Older revision		Revision as of 22:58, 20 January 2013
Line 1:		Line 1:
	[[Category:Valves]]{{Knoppen}}		[[Category:Valves]]{{Knoppen}}
	~~<noinclude><!------------------------------------------------~~
	* READ THIS FIRST		Gravity diverter valves are used to redirect material flow in a gravity stream where there is no pressure differential between the inlet or the discharge leg(s) of the valve.
	* Only edit this page if you can improve the content.
	* Improper use of this page will lead to ~~permanent banning.~~
	* Please do not edit the ~~sponsored link on~~ the ~~top right corner.~~
	* Please start editing this page after the ~~/noinclude~~
	* -------------------------------------------------></noinclude>
	~~This page is still empty. If you know something about this product, please share your knowledge with others~~.

Admin: Created page with "Category:Valves{{Knoppen}}